Nylon PA6 low warp 1.75mm 1Kg

39,90

Beschikbaar via nabestelling

Categorie:

Beschrijving

Description

Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.

Spectrum Nylon PA6 Low Warp advantages:

very low processing shrinkage 0.3%
high temperaturę resistance
easy separation of the object from the table
resistance to abrasion
a wide range of applications
chemical resistance to greases and oils
high mechanical strength
very strong lamination of layers
Packaging

Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

General information
Color: naturalny
Diameter: 1.75mm
Dimensional tolerance: ± 0.05mm
Printing temperature: 250-280°C (recommended ca. 270°C)
Heated bed: not needed
Net weight: 500g
Total weight: 800g
Spool dimensions: external diameter – 20cm, internal diameter – 5,2cm, width 5,2cm