logo-3D-print-it

DURABILITY FOR YEARS

 

Thanks to its resistance to UV radiation, high temperatures and humidity, Fiberlogy ASA is the perfect choice for all 3D printing applications that will be exposed to weather conditions. High mechanical and thermal resistance (up to 94°C) and ease of printing make this material a great replacement for ABS, ensuring its popularity in the automotive industry and in the manufacturing of everyday items.

ASA (acrylonitrile-styrene-acrylate), due to its clearly lower shrinkage than ABS, does not require a heated chamber to ensure a successful print. Unlike its predecessor, ASA gives off much less annoying odours. Less shrinkage and good adhesion prevent the model from curling and cracking and ensure high stability of the print dimensions.

The finished model made with Fiberlogy ASA can be smoothed by exposure to acetone. The material is suitable for sanding and painting. It can also be glued with acetone

Properties:

  • high UV resistance
  • high durability
  • lasting colours
  • resistance to temperatures up to 94°C
  • possibility of finished model machining
  • low odour emission compared to ABS

 

How to print?

The following parameters are only suggested print settings for this material. To ensure the best print quality, it is necessary to choose the appropriate settings for a specific printer and printing conditions.

 

Nozzle Temperature 255-270°C
Bed Temperature 90-110°C
Closed chamber not required
Fan 0-25%
Flowrate 90-100%
Printing Speed < 100 mm/s
Surface glass, kapton tape, ABS juice
Retraction (direct) yes, 1-2 mm
Retraction (bowden) yes, 4-6 mm
Retraction Speed 20-45 mm/s
Drying conditions 80°C / 4h
Notes When printing without a heated chamber, it is recommended to avoid exposing the model to gusts of wind/drafts

 

ASA licht groen 1.75mm 0.75kg

 38,00

(Incl. 21% BTW – Exclusief verzendkosten)

Beschikbaar via nabestelling